PFPB 1219 Commercial Plumbing I (2)
This is a WECM Course Number.
Prerequisite: None.
An introductory study of skills, procedures, and techniques used in the installation of drain, waste, and vent (DWV), and water supply systems in commercial buildings. This course is cross-listed as PFPB 1319. The student may register for either PFPB 1219 or PFPB 1319, but may receive credit for only one of the two. (1 Lec., 3 Lab.)
|
PFPB 1225 Mechanics of Plumbing (2)
This is a WECM Course Number.
Prerequisite: None.
An introduction to the principles of physical science and the mechanics used in the plumbing industry that includes basic principles of physics, matter, liquids, and hydraulics. (1 Lec., 3 Lab.)
|
PFPB 1247 Backflow Prevention (2)
This is a WECM Course Number.
Prerequisite: None.
Principles, practices, and regulations of backflow including backpressure, public health, laws and responsibilities, mechanics and use of backflow devices. Required. (1 Lec., 3 Lab.)
|
PFPB 1248 Medical Gas (2)
This is a WECM Course Number.
Prerequisite: None.
Current terminology, installation of materials, safety practices, design, layout, and inspection techniques for medical gas piping systems. (1 Lec., 3 Lab.)
|
PFPB 1251 Commercial and Industrial Gas Installation (2)
This is a WECM Course Number.
Prerequisite: None.
A study of the principles, code requirements, and practical knowledge needed to design and install commercial and industrial gas supply systems Required. (1 Lec., 3 Lab.)
|
PFPB 1253 Commercial Plumbing II (2)
This is a WECM Course Number.
Prerequisite: None.
A study of methods used in the layout and installation of pneumatic controls, water-heating systems, and piping commonly found in commercial buildings. (1 Lec., 3 Lab.)
|
PFPB 1255 Industrial Plumbing (2)
This is a WECM Course Number.
Prerequisite: None.
A study of the layout and installation of plumbing systems in industrial construction, including water treatment, power plants, and manufacturing facilities. This course is cross-listed as PFPB 1355. The student may register for either PFPB 1255 or PFPB 1355, but may receive credit for only one of the two. (1 Lec., 3 Lab.)
|
PFPB 1272 Basic HVAC for Plumbing/Pipefitting (2)
This is a Local Need Course.
Prerequisite: None.
This course provides an introduction to the basic HVAC and Refrigeration cycle, system components, system operation, application, and design. The student will use gauges to properly test both HVAC and Refrigeration Systems. (1 Lec., 3 Lab.)
|
PFPB 1273 Mechanical Drafting for Plumbing/Pipefitting (2)
This is a Local Need Course.
Prerequisite: None.
Detail drawings with proper dimensioning and tolerances, use of sectioning techniques, common fasteners, pictorial drawings, including bill of materials. (1 Lec., 3 Lab.)
|
PFPB 1274 Basic Computer-Aided Drafting for Plumbing/Pipefitting (2)
This is a Local Need Course.
Prerequisite: None.
An introduction to computer-aided drafting. Emphasis is placed on setup; creating and modifying geometry; storing and retrieving predefined shapes; placing, rotating, and scaling objects, adding text and dimensions, using layers, coordinate systems, and plot/print to scale. (1 Lec., 3 Lab.)
|
PFPB 1277 Introduction to Welding Fundamentals I (2) New course added July 10, 2007
This is a Local Need Course.
Prerequisite: None.
An introduction to the safety, techniques and practice in the use of oxy-fuel and shielded metal arc welding equipment. (1 Lec., 3 Lab.)
|
PFPB 1291 Special Topics in Plumbing Technology/Plumber (2)
This is a WECM Course Number.
Prerequisite: None.
Topics address recently identified current events, skills, knowledges, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. Required. This course may be repeated if topics and learning outcomes vary. (1 Lec., 3 Lab.)
|
PFPB 1308 Basic Pipefitting Skills (3)
This is a WECM Course Number.
Prerequisite: None.
An introduction to the craft including mathematical operations applicable to pipefitting, hand tools, safety practices, and material communication. (2 Lec., 3 Lab.)
|
PFPB 1313 Introduction to the Plumbing Trade (3)
This is a WECM Course Number.
Prerequisite: None.
An introduction to the plumbing craft including mathematical operations applicable to the plumbing trade, hand tools, safety practices, and material identification. Lab required. (2 Lec., 3 Lab.)
|
PFPB 1319 Commercial Plumbing I (3)
This is a WECM Course Number.
Prerequisite: None.
An introductory study of skills, procedures, and techniques used in the installation of drain, waste, and vent (DWV), and water supply systems in commercial buildings. This course is cross-listed as PFPB 1219. The student may register for either PFPB 1319 or PFPB 1219, but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
PFPB 1323 Plumbing Codes I (3)
This is a WECM Course Number.
Prerequisite: None.
An introductory study of state and local plumbing codes and their application in residential and light commercial settings. Required. (2 Lec., 2 Lab.)
|
PFPB 1350 Plumbing and Pipefitting Equipment and Safety (3)
This is a WECM Course Number.
Prerequisite: None.
Safe use of hand tools, power tools, rigging, and power equipment used in the plumbing trade for installation of different plumbing systems. (2 Lec., 3 Lab.)
|
PFPB 1353 Commercial Plumbing II (3)
This is a WECM Course Number.
Prerequisite: None.
A study of methods used in the layout and installation of pneumatic controls, water heating systems, and piping commonly found in commercial buildings. (2 Lec., 3 Lab.)
|
PFPB 1355 Industrial Plumbing (3)
This is a WECM Course Number.
Prerequisite: None.
A study of the layout and installation of plumbing systems in industrial construction, including water treatment, power plants, and manufacturing facilities. This course is cross-listed as PFPB 1255. The student may register for either PFPB 1355 or PFPB 1255, but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
PFPB 2235 Commercial and Industrial Control Systems (2)
This is a WECM Course Number.
Prerequisite: None.
A study of systems design and the equipment used in commercial and industrial control systems, including air handling units, air volume boxes, centrifugal chillers, absorption systems, cooling towers, water treatment, and chilled water systems. (1 Lec., 3 Lab.)
|
PFPB 2239 Commercial and Industrial System Start-Up (2)
This is a WECM Course Number.
Prerequisite: None.
An overview of alignment, testing, start-ups, and troubleshooting of commercial and industrial plumbing systems. (1 Lec., 3 Lab.)
|
PFPB 2271 Advanced HVAC for Plumbers/Pipefitters/AC (2)
This is a Local Need Course.
Prerequisite: None.
This course is a comprehensive study of industrial equipment, applications, and codes that relate to large component split systems, centrifugal chillers, absorption chillers, and related equipment. (1 Lec., 3 Lab.)
|
PFPB 2277 Motors and Pump Alignment for Plumbers/Pipefitters/AC (2)
This is a Local Need Course.
Prerequisite: None.
This course provides a comprehensive introduction to motors and pumps used in commercial and industrial mechanical systems. The student will study system safety and design that apply methods used during installation, alignment, start-up, testing, and balancing motors and pumps used in mechanical systems. (1 Lec., 3 Lab.)
|
PFPB 2278 Industrial Drafting Applications for Plumbing/Pipefitting (2)
This is a Local Need Course.
Prerequisite: None.
An advanced synthesis of industrial drafting practices with emphasis on research, design, and project techniques. (1 Lec., 3 Lab.)
|
PFPB 2279 Pipe Welding for the Plumbing/Pipefitting Professional (2) New course added July 10, 2007
This is a Local Need Course.
Prerequisite: None.
Instructions using layout tools and blueprint reading with demonstration and guided practices specifically utilized by the Plumbing/ Pipefitting industry. (1 Lec., 3 Lab.)
|
PFPB 2301 Pipe Fabrication and Installation I (3)
This is a WECM Course Number.
Prerequisite: None.
Skill development in pipe fabrication and pipe supports. Lab required. (2 Lec., 3 Lab.)
|
PFPB 2336 Commercial Construction and Fixture Setting (3)
This is a WECM Course Number.
Prerequisite: None.
Practices and procedures employed by a plumber in the common construction of a commercial building including multilevel drain waste vent systems, water systems, and fixture installations. (2 Lec., 3 Lab.)
|
PFPB 2341 Pipe Fabrication and Installation II (3)
This is a WECM Course Number.
Prerequisite: None.
In-depth instruction in advanced pipe fabrication procedures including pipe template development. Lab required. (2 Lec., 3 Lab.)
|
PFPB 2343 Pipe Practices (3)
This is a WECM Course Number.
Prerequisite: None.
An advanced course in testing; steam traps; valve maintenance; and the identification, storage, and handling of inline specialties. Lab required. (2 Lec., 3 Lab.)
|
PFPB 2357 Plumbing Codes II (3)
This is a WECM Course Number.
Prerequisite: None.
State and local plumbing codes and the application of potable water, waste water, and gas systems relating to residential and light commercial settings. (2 Lec., 2 Lab.)
|
